FAQ’s About Stump Grinding
Learn More!
Stump Grinding and Debris Removal
We get asked plenty of questions about our stump grinding services! To find some answers to commonly asked questions, take a look at our FAQ’s page below. If you still can’t find what you’re looking for, feel free to give us a call. We would be happy to help you!
Bionic Beaver Stump Grinding
Frequently asked questions
Insurance
Does your company carry General Liability Insurance?
Absolutely! We wouldn’t do business without it. We have a 1,000,000-dollar coverage policy.
Is your company responsible for wires, pipes, and irrigation pipes?
We are not responsible for any pipes, wiring, etc. that are not visible. The homeowner or company is responsible for any repairs & costs of repairs.
Property
How close can you grind next to a fence, concrete slab, or structure?
We can safely get within just a few inches of any structure.
Can you grind stumps on a hill?
We sure can! Our machine is equipped with 4 wheel drive.
Do you remove the stump grinding mulch?
Yes, we offer the removal of grindings as an additional service at an extra charge.
Is there a big mess left after you finish grinding a stump?
There can be a large amount of grindings depending on the size of the stump. We do our best to leave it in a pile if the customer doesn’t want it removed or you can pay extra to have us remove the grindings.
Does stump grinding leave a lot of grindings?
Yes it can! Depending on the size, height, and grade level of the stump. Bionic Beaver offers the service of removal of the grindings and debris.
Does stump grinding leave a hole in my yard?
Stump grinding could leave a hole, but we do our best to fill it in with the grindings left over from the stump leaving the area as level as possible. Stumps generally produce more grindings than is necessary to fill the hole, therefore Bionic Beaver offers removal of grindings and debris.
How far do the trees roots extend out from the stump?
It varies depending on the size and species of tree.
How do you properly measure a stump?
It is important to get accurate measurements of your tree stump. We offer a free in-person estimate to give you a proper assessment of your project. That way, you won’t be hit with any extra fees once the job is started.
Can I plant a new tree in the same spot?
Yes, in some cases you can replant in the same spot but in other cases, you may need to move it to the side of where the original stump was.
Why should I grind a stump?
The most common reasons for stump grinding are; aesthetics, tripping hazards, and tired of mowing around the stump.
Can I just leave my stump to rot in the yard?
You could, but depending on the size, conditions, and variety of tree you had, it can take as long as 15-20 years to decompose! Additionally, it can be a trip hazard, unsightly, and a breeding ground for insects (especially termites and ants, etc…)
Will the stump grinding machine damage my driveway, lawn or sidewalk?
We are very careful with your property. That is why we like to do our free estimates in person to determine if there may be any issues in accessing the stump. If your lawn is wet, we may decide to put down a barrier to drive on, such as plywood.
Do you have protective gear to keep the debris out of my pool?
Yes, we have engineered a mesh screening to help keep mulch debris out of pools and ponds as much as possible.
Do you have protective gear to protect my property?
Yes, we have engineered mesh screens to protect your property such as windows, vehicles, etc. as needed.
What size gate will your stump grinding machine fit through?
The smallest opening we can get our machine through is 36 inches.
Service
Do you guarantee your work?
Absolutely. We guarantee all our work. The job is not complete until the customer is satisfied with the agreed-upon work that we performed.
Can your machine take care of small stumps?
Yes, it can.
Can your machine grind large stumps?
We can grind any size stump.
How long does it take to grind a stump?
It can take anywhere from 15 minutes to several hours! The time that it takes to grind a stump will depend on the size and quantity of the stumps we are grinding.
How deep can your machine grind below the surface?
Our standard grinding depth is 4-6 inches below grade so that you can sod over the area or install small plants. If the job requires us to go deeper we can go up to 21 inches below grade on level grade but there are ways that we can go deeper than that if necessary.
Do you guys grind the surface roots?
Absolutely. We can remove any roots above the surface of the dirt.
Can you remove the entire stump?
Yes, we can.
How many days will it take your company to come grind my stump after I call you?
After we have done our in-person free estimate we can generally schedule your job within 1-2 days, depending on the weather conditions & sometimes we may even be able to do it the same day depending on our schedule.
How far should the trunk of the tree be cut down?
To avoid any additional charge the stump needs to be cut down to no more than 6 inches above grade or ground level.
Do you have the ability to cut down the tree trunk?
Yes, we carry both small & large chainsaws with us at all times.
Do you blow off any debris from driveways, sidewalks, concrete, etc, when you are done stumping?
Yes, we do. We carry a blower with us & we try to leave your property as neat & clean as possible.
Locations
What areas do you service?
HILLSBOROUGH COUNTY
Apollo Beach, Balm, Bayshore, Bloomingdale, Brandon, Buckhorn, Carrollwood, Cheval, Citrus Park, Davis Island, Dover, Durant, East Lake-Orient Park, Egypt Lake-Leto, Fish Hawk, Gibsonton, Greater Carrollwood, Greater Northdale, Hunters Green, Hyde Park, Keystone, Keysville, Knights, Lake Fern, Lake Magdalene, Lithia, Lutz, Mango, MacDill, New Tampa, Northdale, Odessa, Palm River-Clair Mel, Pebble Creek, Plant City, Progress Village, River Hills, Riverview, Ruskin, Seffner, South Tampa, Sun City, Sun City Center, Sydney, Tampa, Tampa Palms, Temple Terrace, Thonotosassa, Turkey Creek, Town ‘n’ Country, University, Valrico, West Chase, West Meadows, Wimauma, Ybor
MANATEE COUNTY
Anna Maria, Bayshore Gardens, Braden River, Bradenton, Bradenton Beach, Cortez, Duette, Edgeville, Ellenton, Fort Hamer, Foxleigh, Holmes Beach, Lakewood Ranch, Longboat Key, Myakka City, Memphis, Oneco, Palma Sola, Palmetto, Parrish, Rubonia, Samoset, South Bradenton, Tallevast, Terra Ceia, West Bradenton, West Samoset, Willow, Whitfield
PASCO COUNTY
Aripeka, Bayonet Point, Beacon Square, Connerton, Crystal Springs, Dade City, Dade City North, Elfers, Heritage Pines, Holiday, Hudson, Jasmine Estates, Key Vista, Lacoochee, Land O Lakes, Meadow Pointe, Meadow Oaks, Moon Lake, New Port Richey, New Port Richey East, Odessa, Pasadena Hills, Port Richey, Quail Ridge, Richland, Ridge Manor, River Ridge, Saint Leo, San Antonio, Seven Oaks, Seven Springs, Shady Hills, Trilby, Trinity, Wesley Chapel, Zephyrhills, Zephyrhills North, Zephyrhills South, Zephyrhills West
PINELLAS COUNTY
Bardmoor, Bay Pines, Bear Creek, Belleair Beach, Belleair Bluffs, Belleair Shores, Belleair, Clearwater, Clearwater Beach, Dunedin, East Lake, Feather Sound, Gandy, Greenbriar, Gulfport, Harbor Bluffs, Indian Rocks Beach, Indian Shores, Kenneth City, Largo, Lealman, Madeira Beach, North Redington Beach, Oldsmar, Ozona, Palm Harbor, Pinellas Park, Redington Beach, Redington Shores, Ridgecrest, Safety Harbor, Saint Pete Beach, Saint Petersburg, Seminole, South Highpoint, South Pasadena, Tarpon Springs, Tierra Verde, Treasure Island, West Lealman
POLK COUNTY
Alcoma, Alturas, Auburndale, Babson Park, Bartow, Bradley Junction, Combee Settlement, Crooked Lake Park, Crystal Lake, Cypress Gardens, Davenport, Dundee, Eagle Lake, Eaton Park, Fort Meade, Four Corners, Frostproof, Fuller Heights, Fussels Corner, Gibsonia, Grenelefe, Haines City, Highland City, Highland Park, Hillcrest Heights, Homeland, Indian Lake Estates, Inwood, Jan-Phyl Village, Kathleen, Lake Alfred, Lake Hamilton, Lake Wales, Lakeland, Lakeland Highlands, Lakeshore, Loughman, Medulla, Mulberry, Nalcrest, Nichols, Poinciana, Polk City, River Ranch, Wahneta, Waverly, Willow Oak, Winter Haven
AND SURROUNDING AREAS
Payments
How do you charge for stump grinding?
We typically charge by the inch but there are variables that can be involved like; the height of the stump, grade of the ground, location, grinding depth, number of surface roots, etc.
How much do you typically charge per inch?
3-5 dollars an inch. That figure is determined by the quantity of stumps & the variables as was mentioned in the prior question.
Do you give discounted rates for multiple stumps?
We sure do! Just let us know how many you have and we can quote you at a discounted rate.
How soon is your company looking for payment once the job is complete?
For residential, we take payments as soon as the job is complete. For commercial we allow up to 30 days after completion.
What form of payments does your company accept?
We accept check, cash, Zelle, or credit card (additional transaction fee for credit cards)
How soon do you provide an invoice?
The office staff will provide a paid invoice within 24-48 hours via email.
We Have The Best Clients!
Our happy customers are what drive us to do what we do. We love helping people get a smooth, stump free property! Read some of our reviews, and feel free to leave your own!